MMotoKnowBase de conocimiento de repuestos de motocicletasPreguntas técnicas
Buscar repuestosMarcas y modelosMotor platformsSize lookupBúsqueda masivaMi listaContacto
言
Espacio de datos
MotoKnowBúsqueda gratuita de repuestos de moto para todos: números OE, compatibilidad y despieces.
Directorio de marcasBuscar repuestosMotor platformsSize lookupBúsqueda masivaContáctanosEnviar una sugerencia
💬Comentarios
⌕Buscar🏍Modelos⚙Motores★Mi lista
Which OE parts, seals and consumables should be prepared for a 10,000 km or 20,000 km major service on Yamaha 155cc scooters? | MotoKnow
Inicio/Preguntas técnicas/Listas de mantenimiento

Este artículo aún no está traducido al español; se muestra la versión en inglés.

Listas de mantenimientoFactory Service Schedule — 10,000 km & 20,000 kmYamaha

Which OE parts, seals and consumables should be prepared for a 10,000 km or 20,000 km major service on Yamaha 155cc scooters?

Complete workshop parts preparation list with intervals, tightening torques, and standard consumable sizes.

NMAX 155Aerox 155XMAX 300⚙ G3E4E⚙ G3L8E
RESPUESTA DIRECTAConclusión verificada en taller

At 10,000 km: replace spark plug (CPR8EA-9), air filter element, CVT case filter foam, and gear oil drain crush washer. At 20,000 km: replace the CVT V-belt, variator rollers (6 pcs), cam sliders (3 pcs), fuel pump O-ring, and inspect valve clearance (Intake 0.10–0.14 mm / Exhaust 0.18–0.22 mm).

CompartirWhatsAppLINETelegramFacebook
MATRIZ DE ESPECIFICACIONES

Especificaciones técnicas y tabla de intercambiabilidad

Componente / revisiónEspecificación AEspecificación BNotas
Spark PlugEvery 8,000 – 10,000 kmNGK CPR8EA-9 (Gap 0.8–0.9 mm)13 N·m (M10×1.0 thread)
Air Filter ElementEvery 10,000 km (5,000 km dusty)2DP-E4451-00 / B65-E4451-00Viscous paper type — do NOT blow with compressed air
CVT V-Belt & RollersEvery 20,000 – 25,000 km2DP-E7641-00 / B65-E7641-00 + 20×12 RollersPrimary nut 49 N·m, Clutch bell nut 45 N·m
Valve Clearance & Cover GasketEvery 12,000 – 20,000 kmIN: 0.10–0.14 mm / EX: 0.18–0.22 mmAlways measure cold (< 35°C); replace rubber gasket if flattened
PROCEDIMIENTO DE TALLER

Verificación y diagnóstico paso a paso

  1. 1
    Prepare single-use gaskets and O-rings before opening covers

    Keep gear oil copper washers, water pump O-rings, and side cover grommets (90480-16805-00) on hand so the scooter doesn't wait on a $1 seal.

  2. 2
    Degrease the CVT torque driver pins at 20,000 km

    Wipe old hardened grease from the 3 guide pins and grooves of the secondary sliding sheave, then repack with high-temp polyurea CVT grease.

PIEZAS OE REFERENCIADAS

Números OE citados y enlaces a sus fichas

Abre cualquier tarjeta para ver la lista completa de compatibilidad o buscar equivalencias.

90480-16805-00Fastener Seal
GROMMETAbrir ficha (8 vehículos) →
2DP-E7641-0020,000 km Service
V-BeltBuscar este número OE en el catálogo →
5ML-E2231-00-00Valve Train
GUIDE, STOPPER 1Abrir ficha (26 vehículos) →
NOTA DE TALLER

Añade una nota de taller o una pregunta de seguimiento

Incluye el modelo, el año y el número OE si lo conoces. Las notas aprobadas se vinculan a las fichas de piezas correspondientes.

PREGUNTAS RELACIONADAS

Preguntas técnicas relacionadas

Q
How to match front fork oil seals by inner tube diameter (26mm, 30mm, 31mm, 33mm, 41mm, 43mm) and stop recurring leaks?Standard Dimension Lookup — ID × OD × Height (mm)
→
Q
Are Yamaha NMAX 155 and Aerox 155 (NVX 155) CVT V-belts, variator rollers and clutch assemblies interchangeable?Partial Interchange — Check Generation (V1 vs V2)
→
Q
Yamaha Aerox 155 / NMAX 155 Error Code 12 (No Crank / No Start): Do you need a full Stator & Rotor Assy or just the connector?Confirmed Fix — Inspect 3-Pin Stator Connector First
→